Ford
Power Stroke Products
COMPUTER MODULE UPGRADES (CHIP)
Install a power module on your Ford to gain that foot stompin’ horsepower
that your looking for! We stock chips from Edge and Burn Superchips
and BD-X-Power chips. Improve your mileage, horsepower and torque
for your gas or diesel.
TURBOCHARGERS
Improve air flow and lower exhaust gas temperatures by installing
an aftermarket Garret ball bearing turbo from BD-Power. We
also install complete turbocharger kits on early Ford IDI engines.
TORQUE CONVERTERS
Improve fuel economy, and reduce oil temps! Replace your stock
torque converter with an aftermarket one from BD Power. We
stock the one you need for your power application.
TRANSMISSIONS
Install an aftermarket performance transmission from BD-Power
and get your torque and horsepower to the ground. We stock
the torque converter you need to compliment the torque and
horsepower level that you have.
PRESSURE LOC
Reduce clutch slippage when the converter lock up clutch engages.
Designed for modified power or exhaust brake equipped engines
with AutoLoc. Call for details.
GEAR VENDOR
Lower engine rpm’s and increase fuel mileage by installing
a Gear Vendor Under/Overdrive to reduce final drive ratio to
drop rpm’s giving you longer engine life and better
mileage.
WATER INJECTION
Install a water/methanol injection kit to increase power and
lower your EGT’s. Kits come in single stage or two stage.
Call for details.
AIR INTAKE SYSTEMS
Install a high air flow, washable and reusable air filter from
K&N to make your engine perform better and last longer.
We stock FIPK systems (Fuel Injection Performance Kit) that
will replace the entire intake system with a cone shaped filter
and mandrel bent tube exactly where the stock system was. This
will help lower EGT’s and improve mileage. We recommend
the FIPK system when achieving higher horsepower levels. Fits
the 7.3L and 6.0L.
EXHAUST KITS
Install 4-5 inch stainless steel and aluminized steel exhaust
kits with free flowing mandrel bent systems to make your engine
breathe better and perform. We install complete systems for
your vehicle to fit your specific application. These kits fit
7.3L and 6.0L engines.
CLUTCHES
We install South Bend aftermarket clutches to help fit the torque
and horsepower level that you have. Call for details.
MAG HYTEC PANS
Improve driveline life by installing Mag-Hytec transmission pans
and differential covers. Extra oil capacity will keep moving
parts lubricated more efficiently, keeping them cooler and
giving you better performance. These pans give strength to
the case and help prevent internal oil leakage.
EXHAUST BRAKES
Looking for more stopping power when towing a heavy load at a
steep decline? Mike’s will install an exhaust brake from
BD-Power to save wear and tear on your brakes. This upgrade
creates back pressure on the motor, causing it to slow down
the vehicle, instead of riding the vehicle brakes through the
corners and down the hills.
LUCAS OIL PRODUCTS
Extend the life of your vehicle by adding Lucas additives into
your power steering, transmission, engine oil and fuel. These
additives help lubricate parts to give optimum performance,
durability and reliability.
BD's Ford Products |